DevicNet Scanner Card LPDN
- In conjunction with system software KR C V5.2 or higher
- PCI card, 2-channeled CAN-interface with a CAN Controller (SJA 1000) and a 386EX-Microcontroller (33MHz) per channel
- two separately working active channels
- each of the two channels of the LPDN scanner card can be run as master and/or slave
- Baud rate: 125, 250, 500 kBaud
- 2 * 5-pol. Phoenix plug for DeviceNet, external power supply, galvanically isolated
Communication driver
- The communication driver reads and writes data synchronously on the DeviceNet. In addition, it allows the asynchronous transmission of a great amount of data from and to the superimposed controller.
- The communication driver is available on the CD-ROM KUKA.KR C-Upgrade DeviceNet 2.1 and necessary in conjunction with system software KR C V5.4 and higher.
- It is possible to use the function QuickConnect, which allows a quick tool change with changing time of < 500 ms in conjunction with DeviceNet modules on the tool.
KUKA.PLC CIF50 (master card or slave card, Fa. Hilscher)
The Hilscher cards can be used together or independently.
The Hilscher cards can be used only in conjunction with ProConOS, further information see under Software Option / KUKA.PLC.
The Hilscher cards are to be used only with a cable inlet.
The communication driver KR C-Upgrade DeviceNet 2.1 on CD-ROM is for the DeviceNet Scanner card obligatory in conjunction with KUKA system software KR C V5.4, V5.5 and KR C V5.6 .
The KUKA.PLC CIF50 cards can be ordered together or separately.
