Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

Ordering information / limitations
The following points must be taken into consideration if a transformer is being used (see under
Power supply / Optional components / Transformers):
Power infeeds CEE 32 A / 5 (with/without 11 h coding) and Han6 EU, and the Han6 transformer
monitoring unit can be used for all transformers.
Power infeed USA 20 A must be used for 8 kVA transformers.
Power infeed USA 25 A must be used for 13 kVA transformers.
Power infeed USA 25 A Han6 must be used for all transformers with 208 V primary voltage.
Power infeed USA 32 A must only be used for transformers with 8 kVA and a primary voltage of 208 V.

If the 24 V / 30 A power supply unit is used, max. 10 A
If the 24 V / 40 A power supply unit is used, max. 20 A

If the 24 V / 30 A power supply unit is used, max. 10 A
If the 24 V / 40 A power supply unit is used, max. 20 A

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).
 

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).

 

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).
 

The transformer is used as a power source for KR C2 cabinets which are connected to power supply
systems other than 400 V, or to 400 V networks without a grounded neutral.
The size of the transformer (8 kVA or 13 kVA) depends on the required power output!

Ordering information / limitations
The 8 kVA transformer must be used with drive configurations 1, 2, 5, 13, 15, 16, 17,18, 24.
The 13 kVA transformer should be selected
- if drive configurations 7, 9, 10, 23, 25, and 26 are used;
- if an external axis is used with KUKA Servo Drive KSD1-64 in the basic cabinet;
- if a top-mounted cabinet is used.

When using a basic cabinet in UL-version, an isolation transformer UL must be selected.

The primary voltage used must always be explicitly specified (see below).
If a transformer is to be used, a transformer installation kit must be ordered (see Transformer installation kit).